• APPK_WebsiteBanners_JP-9

    APPK_WebsiteBanners_JP-9

You are here:Home»Products»Sensors & Analysis»pH Sensors

pH Sensors

pH Sensors

pH+ sensor, gel-filled, sterilizable.

In the biotech- and pharmaceutical industry it is vital to have precise information
about the pH value of the bioprocess. The pH directly affects productivity, stability
and analysis of the active ingredients.
In a bioreactor / fermenter, the environmental conditions for cells or microorganisms should be optimal.
The AppliSens pH+ sensor is the ultimate pH sensor for bioprocess measurement.
The pH+ sensor has a fixed sleeve diaphragm. Compared to other diaphragm
types, the sleeve diaphragm gives increased measuring accuracy and precision, resulting in excellent performance:

  • No cross contamination
  • Precise calibration
  • Not sensitive to fouling
  • No need to recalibrate
  • Low and constant offset
  • Stable signal over time

The sensor is constructed using FDA approved materials, like the non-toxic solid gel
electrolyte. Furthermore this sensor has an internal pressure, which reduces cross
contamination. The pH sensor is designed to withstand repeated sterilization cycles
without failure.
AppliSens sensors have a Long-Life code print (engraved serial number) on the
sensor head and are accompanied by a certificate (good for validation; FDA / GLP).

The electrode has a 12 mm body and a PG13.5 connector and fits into any standard
sensor holder.

 

 

pH_plus_img

 

Ordering information:

Z001012051 SENSOR PH+ L=120MM D=12 K9
Z001015080 SENSOR PH GEL L=150mm D=8 K9 MINIBIO 250
Z001015451 SENSOR PH+ L=154MM D=12 K9
Z001017080 SENSOR PH GEL L=170mm D=8 K9 MINIBIO 250
Z001023551 SENSOR PH+ L=235MM D=12 K9
Z001032551 SENSOR PH+ L=325MM D=12 K9
Z001042551 SENSOR PH+ L=425MM D=12 K9
Z001059051 SENSOR PH+ L=590MM D=12 K9
You have a question and need feedback? Please fill out this form and contact Applikon Biotechnology
1000 characters left